Features

  • 1/2.8″ Progressive CMOS
  • ICR, 1920×1080:25fps(P)/30fps(N)
  • H.265+/H.265/H.264+&H.264
  • 3D DNR, BLC
  • IR range: up to 30m, DC12V & PoE, TF card slot
  • Support mobile monitoring via Hik-Connect
  • power supply no included
  • motorized vari-focal lens

Specifications

Camera
Image Sensor: 1/2.7” Progressive Scan CMOS
Signal System: PAL/NTSC
Min. Illumination: 0.005 Lux @ (F1.2, AGC ON)
Shutter time: 1/3 s to 1/100,000 s
Slow shutter: Support
Lens Mount: CS
Auto Iris: DC drive
Day& Night: IR Cut Filter
Wide Dynamic Range: 120 dB
Digital noise reduction: 3D DNR
Compression Standard
Video Compression: H.265+/H.265/H.264+/H.264/MJPEG
H.264 code profile: Baseline Profile/Main Profile/High Profile
Video bit rate: 32Kbps~8Mbps
Audio Compression: G.711/G.722.1/G.726/MP2L2/PCM
Audio bit rate: 64 Kbps (G.711)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 to 192 Kbps (MP2L2)
Image
Max. Image Resolution: 1920 x 1080
Frame Rate: 50Hz: 25fps (1920 × 1080, 1280 × 960, 1280 × 720)
60Hz: 30fps (1920 × 1080, 1280 × 960, 1280 × 720)
Sub Stream: 50Hz: 25fps (640 × 480, 640 × 360, 320 × 240)
60Hz: 30fps (640 × 480, 640 × 360, 320 × 240)
Image Enhancement: BLC/3D DNR
Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, AGC, and white balance are adjustable by client software or web browser
Automatic gain control: Support
BLC: Support
3D DNR: Support
Day/Night Switch: Day/Night/Auto/Schedule/Triggered by Alarm In
Network
Network Storage: microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR
Alarm Trigger: Motion detection, video tampering alarm, network disconnected, IP address conflict, illegal login, HDD full, HDD error
Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
General Function: One-key reset, Anti-Flicker, heartbeat, mirror, password protection, privacy
mask, Watermark, IP address filtering
System Compatibility: ONVIF (Profile S, Profile G),ISAPI
Interface
Audio: 1 input (line in/mic in, 3.5 mm), 1 output(3.5 mm) (only –AC model supports mic in)
Communication Interface: 1 RJ45 10M / 100M Ethernet interface
Alarm: DS-2CD2821G0: 1 input, 1 output (max. DC 12 V, 30 mA)
DS-2CD2821G0 (AC24V/DC12V): 1 input, 1 output (max. DC 24 V, 1 A or max. AC 110 V, 500 mA)
Video Output: 1Vp-p Composite Output (75 Ω, BNC)
On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button: Yes
Audio
Environment Noise Filtering: Support
Audio I/O: support
Audio Sampling Rate: 8 kHz/16 kHz/32 kHz/44.1 kHZ/48 kHz
Smart Feature-set
Behavior Analysis: Line crossing detection, intrusion detection
Line Crossing Detection: Cross a pre-defined virtual line
Intrusion Detection: Enter and loiter in a pre-defined virtual region
General
Operating Conditions: -10 °C to +50 °C (-14 °F to +122 °F), Humidity 95% or less (non-condensing)
Power Supply: DC: 12 V ± 25% AC: 24 V ± 25% (AC24V models support) PoE: 802.3af, class 3 Terminal block
Power Consumption: DC: 12 V, 0.4 A, max: 4.8 W
AC: 24 V, 0.2 A, max: 4.8 W (AC24V model supports)
PoE: (802.3af, 36 V to 57 V), 0.2 A to 0.1 A, max: 6 W
Dimensions: Camera: 68 × 56 × 143 mm (2.7" × 2.2"× 5.6")
With package: 172 × 110 × 99 mm (6.8" × 4.3"× 3.9")
Weight: Camera: 440 g (1 lb.)
With package: 600 g (1.3 lb.)

RELATED PRODUCTS

DS-2CD1023G0E

  • 2MP B1 series IR Camera
  • 1/3″ Progressive CMOS
  • H.265+/H.265/H.264+&H.264
  • IR range: up to 30m
  • DC12V & PoE,Support mobile monitoring via Hik-Connect

DS-2CD1623G0

  • 1/3″ Progressive CMOS, ICR, Color: 0.028 Lux @(F2.0; AGC ON), 0lux with IR
  • 1920×1080:25fps(P)/30fps(N)
  • H.265+/H.265/H.264/MJPEG, DC12V & PoE, 3D DNR, BLC
  • IR range: up to 30m, HIK-Connect cloud service
  • NF: without SD card slot

DS-2CD1123G0E

  • 2MP B1 series IR Camera
  • 1/3″ Progressive CMOS
  • H.265+/H.265/H.264+&H.264
  • IR range: up to 30m
  • DC12V & PoE,Support mobile monitoring via Hik-Connect